Refrigerated Air Dryers provide clean and dry compressor air due to effective moisture separation. Ensure a constant dew point at all load levels and will deliver a continuous dry air performance . Refrigerated air dryers provide the very best combination of high efficiency, low pressure drop and small footprint which reduces power consumption reduces installation time and facilitates maintenance.
Latest Technology of aluminum plate heat exchangers.
Plate type heat exchange are compact and light in weight.
Latest technology of vacuum brazing used on the plate type heat exchangers
Heat Exchangers put to helium leak test up to 27-bar g
Optimum selection of compressor with high COP contributes to power benefits
Victaulic coupling provide on the compressed air inlet and outlet connections for easy maintenance.
Negligible pressure-drop in the refrigeration line, hence utilizing complete rated cooling capacity of the compressor.
Heat Exchangers easily retrofitted without affecting the refrigeration line. Rotolocks at the refrigerant inlet and outlet.
Refrigeration piping leak tested with electronics detectors ensuring that the leak is of the order of 3 g/year
RS 232 port with interface software provided as` an optional feature for remote monitoring.
Capacity: 5 to 85 & 85 to 10,000 cfm.
Operating Pressure: 3 to 14 bar g.
The below mentioned Technical Specification are for the following standard conditions
Heatless Regenerative Desiccant Air Dryer Designed for consistent-pressure dew points,
eliminate water and freeze-up in low ambient temperatures. Heatless Regenerative Desiccant Air Dryer
provide clean, dry, compressed air due to effective moisture separation & extremely reliable and
requires little maintenance with very few moving parts.
Heatless Regenerative Desiccant Air Dryer come completely
assembled, piped and wired, with a full charge of activated Alumina Desiccant, generally have a small
footprint taking up less valuable factory floor space
New esthetical design.
Microprocessor control panel with regulation control panel operation cycle display functions to adopt the working conditions ( dew point ) to the end user's requirements.
New pneumatics valves, high orifice, easy to maintain, designed for heavy duty controls.
Slow re-pressurization prevent bed lifting abrasion and extends desiccant life.
Designed for adverse conditions at 45oC compressed air.
Temperature and maintains (-) 40oC dew point @ 0.3 bar pressure difference.